Injection Molded Part Wall Thickness Design 3: Performance-Oriented Wall Thickness Design Strategy

Previous two chapters shared general design principles and materials for wall thickness. After meeti...

News2026-07-04



Scientific Setting of Injection Molding Holding Pressure Stage – (Traditional Holding Pressure Param

This chapter will focus on traditional methods used in production practice to determine holding pres...

News2026-07-04



Essentials of European Plastic Mold Design, Part 3: Starting with Details to Create High-Quality Mol

For previous reading, please refer to Injection Molded Part Wall Thickness Design 2: Material Proper...

News2026-07-02



Injection Molding Cycle Time Calculation Guide: In-depth Analysis from RFQ to Mass Production, Helpi

In injection molding industry, cycle time is a matter of life and death. Accurate estimation leads t...

News2026-07-02



An article to understand degassing process of die-casting aluminum alloy melting

In actual production of aluminum die-casting, pores and oxide inclusions are one of the most common ...

News2026-07-01

Injection Molded Part Wall Thickness Design 2: Material Properties and Recommended Wall Thickness Va

Those in product development know that two biggest concerns in plastic part mold making are shrinkag...

News2026-07-01



Design of Injection Mold for Automotive Pipe Bend Joint

There are many types of bent pipe plastic parts in automobiles, such as intake pipes and fuel tank c...

News2026-07-01



Injection Molded Part Wall Thickness Design 1: Understand These 3 Principles to Avoid 2 Years of Det

After working on injection molded parts for so many years, do you really understand wall thickness d...

News2026-06-30



Basic elements of injection molding: pressure, speed, position, time, temperature...

Pressure provided by injection molding machine's pressure system (oil pump) or servo motor is mainl...

News2026-06-30



Simulation and Optimization of High-Pressure Die Casting Process for Differential Housing

Abstract: To address issues such as porosity and shrinkage cavities during high-pressure die casting...

News2026-06-29