Warpage Analysis and Structural Optimization of Arc-shaped Base Assembly

Arc-shaped base assembly is a 1/3 ring structure, diameter of outer ring is φ125mm, diameter of inn...

News2023-02-27



Design of Injection Mold for Self-generating Exercise Bike Fork Seat

Multiple different plastic parts formed in same pair of molds are called family molds. Advantages ar...

News2023-02-24



Auto parts bottom frame injection mold design

Bottom frame products of auto parts are shown in Figure 1. Maximum dimensions of product are 147.00 ...

News2023-02-23



Incomplete cleaning of screw? See if these steps are done right!

Screw cleaning is a problem that every injection molding factory must face. Whether it is shutdown c...

News2023-02-22



POM plastic injection process

POM (also known as Saigang, Trane). It is obtained by polymerization of formaldehyde as raw material...

News2023-02-21

Injection mold guide positioning system

One. Concept:
In injection mold, structure that ensures that movable parts move according to establi...

News2023-02-20



Two-color injection mold design for electric shaver battery cover

Electric shaver battery cover product is shown in Figure 1. Maximum external dimensions of product a...

News2023-02-17



Structural design and precautions of left and right Haval sliders of plastic mold "two-color mo

 
Soft rubber TPE joint is on the side of female mold, and side of male mold can be completely cons...

News2023-02-16



Injection Molding Process Technical Guide

Taking plunger injection machine as an example, principle of injection molding is shown in Figure 4-...

News2023-02-13



Influence of injection temperature and speed on product shrinkage

Shrinkage problem of hard plastic parts (surface shrinkage and internal shrinkage cavity) is caused ...

News2023-02-09