Matching injection molding machine to mold (product) is a prerequisite for obtaining high-quality pr

Time:2026-11-14 08:37:55 / Popularity: / Source:

What is compatibility? To make friends, you should have similar odors; for marriage, you should have talent of a man and beauty of a woman; and for working together, you should have complementary abilities and personalities. Only in this way can you be long-term and successful. This is a high degree of matching.
injection molding machine 
But if two things that don't match are forcibly combined together, there will definitely be no good results, and melon that is forced will not be sweet.
Matching degree between injection molding machine and mold (product) refers to performance of injection molding machine meeting production needs of mold, quality needs of product, and needs of production costs.
Specifically, matching degree includes primary matching and advanced matching. Primary matches include: Clamping force matching; Mold size matching; Matching injection volume.
This primary matching is already common knowledge and does not need to be elaborated.
Advanced matches include:
1. Plasticizing speed matching: Specifically speaking, plasticizing time cannot be longer than cooling time required for product, otherwise cycle will be extended.
2. Melt quality matching: Specifically, temperature and density of plasticized melt are uniform and there is no degradation. Uniformity is a qualitative description, not a quantitative description. The higher product quality requirements, the higher melt glue quality requirements. To obtain better melt quality, screw design of injection molding machine must better match plastic material used, and temperature control of plasticizing unit must be more precise. This requires a more sophisticated injection molding machine.
3. Injection pressure matching: thin-walled products require high-speed and high-pressure injection; thick-walled lamp parts require high-pressure holding. Pressure is guarantee of speed. Without matching pressure capacity, it cannot meet quality requirements of some products with special requirements.
4. Speed linear matching: Injection speed and injection time represent same parameter, that is, speed of injection. Theoretically, there is a linear relationship between injection speed and time, that is, as speed increases, required injection time shortens linearly. This is called speed linearity. However, in fact, due to machine's response, pressure limitations, relationship between speed and time is not necessarily linear. Machines with poor speed linearity are also powerless for some products with high requirements.
5. Control accuracy matching: position control, speed control, pressure control, temperature control, time control. Control accuracy in these aspects has a great impact on experience of plastic materials during injection molding process, which in turn affects quality and production stability of molded products For example, improving stop stress mark defect requires injection molding machine to have high control accuracy.
6. Response time matching: machine's response time to instruction execution. Injection molding machine has a response time for executing speed change and voltage change instructions. No matter how short this time is, it will take a certain amount of time. Injection molding process is a dynamic process. Flow wave front shape and solidified layer thickness change during filling process; pressure distribution and material viscosity change during pressure holding process, etc. If response speed is too slow (response time is too long), right opportunity will be missed. Some consumer electronic products with high requirements for appearance often require high-speed injection in order to obtain a high-quality appearance. Some products with exquisite structures and fine features, such as connectors, also require high-speed injection. Injection time of such products is often within 1 second. If machine response time is too long, consequences can be imagined; if it is injected in segments, each speed change will take time to respond. If you think about this problem carefully, you will know that there is no point in having too many segments for some small products.
7. Action speed matching: Some consumable products and some disposable items, such as fast food boxes, have a very short cycle, which requires injection molding machine to open and close mold, manipulator to move quickly to improve efficiency, because profit from production of such products lies in shortening cycle as much as possible.
8. Advanced function matching: For example, sequence control of needle valve gate. Conventional method is to adjust delayed opening and closing time of gate to achieve sequential pouring. However, injection time is related to injection speed, and if speed changes, if time is not adjusted accordingly, originally set switching sequence may be disrupted, which brings great challenges to debugging. Some advanced injection molding machines can realize position control, using screw to reach a certain position as a signal for opening of a certain gate, so that condition sequence is much more convenient. As long as position is determined, no matter how speed changes, set gate position will not be disturbed. This is advanced feature matching.
9. Cost-effective matching: High-performance equipment means high prices, so investing in high-performance equipment must be supported by high value-added products. Although sometimes high-performance equipment can reduce overall manufacturing costs, for example, using it to produce ordinary products can achieve faster cycle times and more stable quality, reduction in overall costs brought about by these does not always offset its absolute high price. Therefore, from an economic perspective, cost performance must be considered.
10. Quick switching and matching: color change, material change, this belongs to management category. For example, if a dedicated machine produces black products, switching to white materials will take a long time and may not be completely clean. Then it is necessary to arrange machines by color.
injection molding machine 
Enterprises should establish a ledger of injection molding machine performance and parameters, prepare a mold history, on this basis establish a matching relationship between machine and mold. Only when machine and mold are highly matched can production be stable and quality high.

Go To Top