A Brief Discussion on Injection Molding Production Management
Time:2026-11-20 08:26:49 / Popularity: / Source:
Injection molding production cost refers to all expenses incurred during injection molding process, including: labor, electricity, mold costs, raw materials, auxiliary materials, equipment depreciation costs, factory rent, etc.
Injection molding is a knowledge-intensive, highly specialized, and experience-based industry. It involves knowledge of polymer processing principles, production planning and management, injection molding quality process control, injection molding engineering process management, injection molding workshop on-site management, and safety production management.
Achieving "safety, high quality, high efficiency, and low consumption" in injection molding production, and maximizing economic benefits of injection molding production, is goal pursued by enterprises.
Injection molding is a knowledge-intensive, highly specialized, and experience-based industry. It involves knowledge of polymer processing principles, production planning and management, injection molding quality process control, injection molding engineering process management, injection molding workshop on-site management, and safety production management.
Achieving "safety, high quality, high efficiency, and low consumption" in injection molding production, and maximizing economic benefits of injection molding production, is goal pursued by enterprises.
Inadequate pre-production and in-production management in injection molding can lead to high defect rates, significant raw material waste, delayed delivery, bulk returns, and even safety accidents, resulting in low production efficiency and high production costs.
This necessitates that injection molding managers possess a deep understanding of injection molding production management systems, data cost management systems, quality management systems, and PIE (Production Injection Quality) management. They must design a scientifically feasible management plan based on company's current situation. This requires a comprehensive and systematic improvement of organizational structure, standardization of production management processes, establishment of standardized injection molding processes and equipment/mold maintenance management systems.
Furthermore, it is crucial to establish an injection molding cost data management system, develop quality standards and a continuous improvement management system, improve horizontal and vertical communication management processes, standardize material storage management processes, improve training management systems, and refine KPI performance evaluation management systems. By cultivating correct work ethic, diligently implementing PDCA (Plan-Do-Check-Act) management approach, continuously optimizing production processes, and enhancing cost awareness among personnel in all positions, it is essential to fundamentally prevent various major anomalies in injection molding production.
This necessitates that injection molding managers possess a deep understanding of injection molding production management systems, data cost management systems, quality management systems, and PIE (Production Injection Quality) management. They must design a scientifically feasible management plan based on company's current situation. This requires a comprehensive and systematic improvement of organizational structure, standardization of production management processes, establishment of standardized injection molding processes and equipment/mold maintenance management systems.
Furthermore, it is crucial to establish an injection molding cost data management system, develop quality standards and a continuous improvement management system, improve horizontal and vertical communication management processes, standardize material storage management processes, improve training management systems, and refine KPI performance evaluation management systems. By cultivating correct work ethic, diligently implementing PDCA (Plan-Do-Check-Act) management approach, continuously optimizing production processes, and enhancing cost awareness among personnel in all positions, it is essential to fundamentally prevent various major anomalies in injection molding production.
Establishing a Sound Organizational Structure
In a factory production management system, planning and control can only be effectively implemented within a suitable organization. Establishment of an injection molding production management system should begin with an organizational structure. Organizational charts and job descriptions are crucial tools for managers to oversee factory. After designing organizational charts and job descriptions, suitable personnel should be identified to perform tasks, ensuring that everyone's talents are fully utilized to achieve organizational goals. This significantly reduces issues like buck-passing and over-the-top reporting.
Organizational structure can be designed based on workshop's production scale and actual conditions. Generally, it can be divided into following two types:
1. Material storage and process group are managed by injection molding department, with process engineer being injection molding manager. This organizational structure places high demands on comprehensive abilities of injection molding supervisor. Supervisor must be familiar with quality standards, proficient in production management, material management, data management, process management, and possess strong resilience under pressure.
Advantages of this organizational structure are low management costs and ability to resolve production process issues quickly. Disadvantages are a high dependence on injection molding supervisor; work efficiency depends not only on manager's ability but also on supervisor's sense of responsibility, and improper handling can easily lead to production loss of control. This structure is suitable for small workshops with a limited number of machines.
2. Material room is managed by warehouse, process group has its own independent production department, injection molding supervisor only oversees production site and progress. This structure significantly reduces impact of human factors on management, allowing relevant departments to supervise each other and perform their respective duties. Advantage of this structure is more standardized management, but disadvantages are high management costs and slow response to production process problems. This structure is suitable for medium to large-sized workshops requiring refined management.
Organizational structure can be designed based on workshop's production scale and actual conditions. Generally, it can be divided into following two types:
1. Material storage and process group are managed by injection molding department, with process engineer being injection molding manager. This organizational structure places high demands on comprehensive abilities of injection molding supervisor. Supervisor must be familiar with quality standards, proficient in production management, material management, data management, process management, and possess strong resilience under pressure.
Advantages of this organizational structure are low management costs and ability to resolve production process issues quickly. Disadvantages are a high dependence on injection molding supervisor; work efficiency depends not only on manager's ability but also on supervisor's sense of responsibility, and improper handling can easily lead to production loss of control. This structure is suitable for small workshops with a limited number of machines.
2. Material room is managed by warehouse, process group has its own independent production department, injection molding supervisor only oversees production site and progress. This structure significantly reduces impact of human factors on management, allowing relevant departments to supervise each other and perform their respective duties. Advantage of this structure is more standardized management, but disadvantages are high management costs and slow response to production process problems. This structure is suitable for medium to large-sized workshops requiring refined management.
Standardizing Production Management Processes
In increasingly competitive environment of plastics industry, plastic product factories need to continuously adjust and optimize their production management processes to cope with rapidly changing market and quickly respond to customer needs. Enterprise's management system also needs continuous refinement to improve operational efficiency and reduce operating costs. Ultimate goal of a plastic product factory is to support achievement of business objectives and to adapt to rapid deployment of new processes to meet needs of rapid business launches and increasingly refined management.
To achieve this, plastic product factories must meet the following requirements:
1. Establish an order acceptance management process. Order acceptance must be based on factory's actual production level and production load to prevent unnecessary losses caused by inadequate communication between production and business management.
2. Establish an injection molding production management process. Design and optimize each process point, standardize responsibilities and work standards of each process point, and ensure that each process point from order placement to order completion is under control.
3. Establish an injection molding IPQC workflow, clarify responsibilities of relevant departments, strictly implement it during production process, continuously optimize production processes, and ensure that product quality meets and exceeds customer expectations.
4. Establish injection molding material management processes, clearly defining the responsibilities and authority of relevant departments. All materials must be tracked in and out according to orders to ensure controlled material management.
5. Establish horizontal and vertical communication management processes. Without communication, there is no management. Effectiveness of communication directly impacts work quality and results. Clearly define and standardize communication interfaces and methods to ensure that company instructions, plans, information can be effectively communicated and coordinated, ensuring unified execution around achievement of various corporate targets.
To achieve this, plastic product factories must meet the following requirements:
1. Establish an order acceptance management process. Order acceptance must be based on factory's actual production level and production load to prevent unnecessary losses caused by inadequate communication between production and business management.
2. Establish an injection molding production management process. Design and optimize each process point, standardize responsibilities and work standards of each process point, and ensure that each process point from order placement to order completion is under control.
3. Establish an injection molding IPQC workflow, clarify responsibilities of relevant departments, strictly implement it during production process, continuously optimize production processes, and ensure that product quality meets and exceeds customer expectations.
4. Establish injection molding material management processes, clearly defining the responsibilities and authority of relevant departments. All materials must be tracked in and out according to orders to ensure controlled material management.
5. Establish horizontal and vertical communication management processes. Without communication, there is no management. Effectiveness of communication directly impacts work quality and results. Clearly define and standardize communication interfaces and methods to ensure that company instructions, plans, information can be effectively communicated and coordinated, ensuring unified execution around achievement of various corporate targets.
Establish injection molding quality standards and a continuous improvement system
"Product quality is the lifeblood of an enterprise." High rates of returned plastic products and production defects represent the greatest waste, causing significant economic losses (tangible) and damaging company's reputation (intangible).
Many injection molding plants suffer from following problems: Relevant quality standards documents are either not yet issued or incomplete (structural drawings and appearance standards), and many issues ultimately require final approval from general manager; inspection system is merely a formality, failing to detect problems during production and only revealing defects after production has commenced;
Personnel in relevant departments and positions lack sufficient quality awareness (a "good enough" mentality prevails), concept that high-quality products are result of design and management has not been established; when quality problems arise, departments shift responsibility instead of scientifically preventing problems before production, strengthening inspection control and self-inspection during production.
In view of above problems, following requirements should be met:
1. Establish quality standards for plastic products. Assembly standards, structural drawings, appearance standards must be standardized and detailed (processing factories should use customer samples, structural drawings, and appearance standards as benchmarks; these must be clearly defined when accepting orders, and quality issues should not be ambiguous).
2. Establish quality inspection standards, compile inspection procedures that clearly define technical requirements, inspection items, item indicators, methods, frequency, etc., and rationally set inspection points in process flow.
3. Inspect plastic products according to technical requirements and inspection procedures, ensuring original records are complete and accurate.
4. Strictly control defective products, track and record rework and repairs, and handle them according to prescribed procedures.
5. Clearly mark and store or isolate products awaiting inspection, qualified products, reworked products, and scrap products separately.
6. All quality inspection records, physicochemical analysis reports, control charts, etc., for each process must be archived according to filing system.
7. Compile and complete quality statistics tables and other quality problem feedback forms for each process. Promptly handle and report any sudden quality information.
8. Establish and diligently implement a system for feedback and handling of quality problems discovered in subsequent processes, including during delivery and use.
9. Establish a continuous quality improvement system. Classify, statistically analyze, and report various quality defects according to prescribed procedures. Hold weekly quality improvement meetings, develop quality improvement plans for major defect items, and diligently organize their implementation.
Many injection molding plants suffer from following problems: Relevant quality standards documents are either not yet issued or incomplete (structural drawings and appearance standards), and many issues ultimately require final approval from general manager; inspection system is merely a formality, failing to detect problems during production and only revealing defects after production has commenced;
Personnel in relevant departments and positions lack sufficient quality awareness (a "good enough" mentality prevails), concept that high-quality products are result of design and management has not been established; when quality problems arise, departments shift responsibility instead of scientifically preventing problems before production, strengthening inspection control and self-inspection during production.
In view of above problems, following requirements should be met:
1. Establish quality standards for plastic products. Assembly standards, structural drawings, appearance standards must be standardized and detailed (processing factories should use customer samples, structural drawings, and appearance standards as benchmarks; these must be clearly defined when accepting orders, and quality issues should not be ambiguous).
2. Establish quality inspection standards, compile inspection procedures that clearly define technical requirements, inspection items, item indicators, methods, frequency, etc., and rationally set inspection points in process flow.
3. Inspect plastic products according to technical requirements and inspection procedures, ensuring original records are complete and accurate.
4. Strictly control defective products, track and record rework and repairs, and handle them according to prescribed procedures.
5. Clearly mark and store or isolate products awaiting inspection, qualified products, reworked products, and scrap products separately.
6. All quality inspection records, physicochemical analysis reports, control charts, etc., for each process must be archived according to filing system.
7. Compile and complete quality statistics tables and other quality problem feedback forms for each process. Promptly handle and report any sudden quality information.
8. Establish and diligently implement a system for feedback and handling of quality problems discovered in subsequent processes, including during delivery and use.
9. Establish a continuous quality improvement system. Classify, statistically analyze, and report various quality defects according to prescribed procedures. Hold weekly quality improvement meetings, develop quality improvement plans for major defect items, and diligently organize their implementation.
Establish a standardized injection molding process and equipment/mold maintenance management system
Production process is core foundation for ensuring product quality. Quality standards determine process standards, and optimizing process standards can improve quality standards. Injection molding process standards should be divided into two aspects: injection molding process parameter standards and operation and packaging process standards.
Molding quality of finished product mainly depends on equipment, mold, raw materials, and injection molding process parameters. Establishing injection molding process parameter standards requires stabilizing three key elements: equipment, mold, and raw materials. This necessitates establishing an equipment/mold maintenance management system and standardized raw material usage.
Given aforementioned issues, following requirements should be met:
1. Develop safe operating procedures and a three-level maintenance system for equipment. Standardize daily equipment use and maintenance, prioritizing prevention to eliminate major safety accidents, reduce probability of equipment damage caused by subjective factors, and ensure equipment operates in ideal condition.
2. Injection molding engineers should participate in internal review meeting before mold opening for injection molded parts, providing reasonable suggestions from perspective of injection molding process to optimize mold water entry and demolding methods.
3. Establish safe operating procedures and daily maintenance systems for molds, standardize daily use and maintenance of molds, prioritize prevention, address problems promptly, continuously optimize mold production status, and strive for molds to operate in ideal conditions.
4. Establish standards for material mixing and coloring, sprue crushing and recycling, and material drying operations, standardizing the entire raw material preparation process to ensure stable and reliable quality of production materials.
5. Develop a standardized management plan for injection molding processes, organize and promote effective implementation of standardized injection molding processes, select suitable project engineers to lead implementation of management plan, ensure active participation and cooperation of all relevant departments.
6. Establish an injection molding cost data management system. Data-driven management is foundation of scientific management. In today's fiercely competitive injection molding industry, production management decisions can no longer be made based on intuition but should be based on facts and data.
7. MRPII and ERP systems are excellent data management tools, but their high investment costs make them impractical for small, newly established factories. However, their management methods can be learned from, and relevant forms and systems can be developed based on factory's actual situation to diligently implement data collection, organization, and analysis, ensuring data objectivity and accuracy, providing a basis for production management decisions and performance evaluation.
Given above-mentioned problems, following requirements should be met: Develop a Bill of Materials (BOM) for injection molding; Develop a standard injection molding cycle and a personnel allocation list for mold positions; Develop a cost accounting system for injection molding orders, ensuring independent accounting for each order; Develop a management system for injection molding production dashboards (various reports used in production).
Molding quality of finished product mainly depends on equipment, mold, raw materials, and injection molding process parameters. Establishing injection molding process parameter standards requires stabilizing three key elements: equipment, mold, and raw materials. This necessitates establishing an equipment/mold maintenance management system and standardized raw material usage.
Given aforementioned issues, following requirements should be met:
1. Develop safe operating procedures and a three-level maintenance system for equipment. Standardize daily equipment use and maintenance, prioritizing prevention to eliminate major safety accidents, reduce probability of equipment damage caused by subjective factors, and ensure equipment operates in ideal condition.
2. Injection molding engineers should participate in internal review meeting before mold opening for injection molded parts, providing reasonable suggestions from perspective of injection molding process to optimize mold water entry and demolding methods.
3. Establish safe operating procedures and daily maintenance systems for molds, standardize daily use and maintenance of molds, prioritize prevention, address problems promptly, continuously optimize mold production status, and strive for molds to operate in ideal conditions.
4. Establish standards for material mixing and coloring, sprue crushing and recycling, and material drying operations, standardizing the entire raw material preparation process to ensure stable and reliable quality of production materials.
5. Develop a standardized management plan for injection molding processes, organize and promote effective implementation of standardized injection molding processes, select suitable project engineers to lead implementation of management plan, ensure active participation and cooperation of all relevant departments.
6. Establish an injection molding cost data management system. Data-driven management is foundation of scientific management. In today's fiercely competitive injection molding industry, production management decisions can no longer be made based on intuition but should be based on facts and data.
7. MRPII and ERP systems are excellent data management tools, but their high investment costs make them impractical for small, newly established factories. However, their management methods can be learned from, and relevant forms and systems can be developed based on factory's actual situation to diligently implement data collection, organization, and analysis, ensuring data objectivity and accuracy, providing a basis for production management decisions and performance evaluation.
Given above-mentioned problems, following requirements should be met: Develop a Bill of Materials (BOM) for injection molding; Develop a standard injection molding cycle and a personnel allocation list for mold positions; Develop a cost accounting system for injection molding orders, ensuring independent accounting for each order; Develop a management system for injection molding production dashboards (various reports used in production).
Improve Training Management System
People are core of five elements of production; all production plans rely on people for execution. Once plan is determined, effectiveness of work depends primarily on job skills and service awareness of executing positions. Each factory will have different requirements for employee job skills and service awareness, which requires each factory to develop a training management system based on its own actual situation to meet factory's development needs. (Unfortunately, many factories merely go through motions to pass certification.)
Given aforementioned problems, following requirements should be met:
1. Establish a training management system, assign responsibility for training projects, develop training plans, and focus on tracking training effectiveness until requirements are met.
2. Training content (only Level 2 and 3 training will be discussed below) should include following: 5S management standards for workshop; Safe operating procedures for workshop equipment; Work process guidance; Quality standard management standards; Production report completion standards; Job responsibilities; Improve KPI performance appraisal management system.
Given aforementioned problems, following requirements should be met:
1. Establish a training management system, assign responsibility for training projects, develop training plans, and focus on tracking training effectiveness until requirements are met.
2. Training content (only Level 2 and 3 training will be discussed below) should include following: 5S management standards for workshop; Safe operating procedures for workshop equipment; Work process guidance; Quality standard management standards; Production report completion standards; Job responsibilities; Improve KPI performance appraisal management system.

