Fully Automated Injection Mold Design
Time:2026-11-13 08:39:33 / Popularity: / Source:
Injection molding market is becoming increasingly competitive, molding quality and efficiency are crucial to a company's survival. Improving production efficiency requires racing against time and achieving automated production. Degree of automation in plastic product manufacturing equipment has become a key indicator of a company's overall strength. Robots and their automated systems are highly valued high-tech technologies both domestically and internationally. High-quality clients prefer to cooperate with injection molding manufacturers that have robots. Using robots largely overcomes inertia of manual labor, allowing for accurate calculation of daily output and delivery dates. Robots can address challenges such as high employee turnover, shorter delivery cycles, safety issues. Robots remove products and place them on conveyor belts or receiving tables, requiring only one person to monitor, or one person can simultaneously monitor two or more injection molding machines, saving labor. Automated production lines further save space, making entire plant smaller, more compact, more refined.
Molding quality is related to performance of injection molding machine itself, mold process, and surrounding environment. Molding efficiency is related to mold precision, molding process, and production volume. Due to diverse nature of molded products and complexity of automation applications, robotic arms can overcome inefficiencies of manual labor and ensure quality of molded products. Main uses of robotic arms are as follows:
Removing products from mold, transforming semi-automatic production into fully automated production; Removing products from outside mold and embedding them inside (labeling, metal embedding, secondary molding, etc.); Automatic packaging and warehousing after removal by robotic arm; Used in automatic raw material feeding systems and waste recycling systems; Used in overall plant production control systems.
Using robotic arms can stabilize production cycles, increase efficiency, and facilitate production management. Stable production cycle inherently increases output and profits. Using robotic arms improves safety, preventing workplace injuries caused by negligence or fatigue. When humans enter mold to remove products, there is a risk of hand injury if injection molding machine malfunctions or buttons fail, causing mold closure. This is especially dangerous for workers on two or three shifts, as physiological fatigue is more likely to occur at night, increasing risk of accidents. Using robotic arms ensures safe production, especially in large injection molding machines. Robotic arms can standardize production time for each mold, ensuring consistent plasticizing, injection, holding, cooling, and mold opening/closing times, thus improving product yield. For example, with a 30-second injection cycle, manual removal takes 6 seconds, while robotic removal takes only 1.5 seconds. A 120t injection molding machine with a 15kW motor can mold 800 molds manually in an 8-hour shift. Using a robotic arm increases this to 915 molds, a 14% increase in efficiency. Machine consumes 120 kWh of electricity in 8 hours, resulting in a saving of 120 x 14% = 17 kWh. It also improves product quality. Newly molded products retain residual heat; manual removal leaves fingerprints and uneven force, leading to uneven deformation. Automatic demolding can cause damage from falling products, and oil contamination can result in defective products. Robotic arm uses a textureless suction device to remove products, applying even force, with a fixed mold-closing time and normal mold temperature. This reduces product defect rates, saves raw materials, lowers costs, and significantly improves product quality. Unpredictable removal times by workers can cause product shrinkage or overheating and deformation of plastic. If workers fail to remove product successfully, mold closing can damage mold. If robotic arm fails to remove product, it will automatically alarm and stop.
Using a robotic arm to grip plastic parts and runner system sprue is one of main methods of fully automated injection molding. Molds using robotic arms require special attention during mold design. After mold opening and ejection, plastic parts and runner system sprue must be positioned for easy robotic arm gripping. Figure 1-12 shows runner designs suitable for robotic arm operation. Figure (a) shows a three-plate mold with a long runner system sprue that is easy to flip. A small boss is designed on the top side of mold for positioning, facilitating robotic arm gripping. Figure (b) shows a two-plate mold where runner system sprue is on ejector pin after ejection, making it easy for robotic arm to grip.
Molding quality is related to performance of injection molding machine itself, mold process, and surrounding environment. Molding efficiency is related to mold precision, molding process, and production volume. Due to diverse nature of molded products and complexity of automation applications, robotic arms can overcome inefficiencies of manual labor and ensure quality of molded products. Main uses of robotic arms are as follows:
Removing products from mold, transforming semi-automatic production into fully automated production; Removing products from outside mold and embedding them inside (labeling, metal embedding, secondary molding, etc.); Automatic packaging and warehousing after removal by robotic arm; Used in automatic raw material feeding systems and waste recycling systems; Used in overall plant production control systems.
Using robotic arms can stabilize production cycles, increase efficiency, and facilitate production management. Stable production cycle inherently increases output and profits. Using robotic arms improves safety, preventing workplace injuries caused by negligence or fatigue. When humans enter mold to remove products, there is a risk of hand injury if injection molding machine malfunctions or buttons fail, causing mold closure. This is especially dangerous for workers on two or three shifts, as physiological fatigue is more likely to occur at night, increasing risk of accidents. Using robotic arms ensures safe production, especially in large injection molding machines. Robotic arms can standardize production time for each mold, ensuring consistent plasticizing, injection, holding, cooling, and mold opening/closing times, thus improving product yield. For example, with a 30-second injection cycle, manual removal takes 6 seconds, while robotic removal takes only 1.5 seconds. A 120t injection molding machine with a 15kW motor can mold 800 molds manually in an 8-hour shift. Using a robotic arm increases this to 915 molds, a 14% increase in efficiency. Machine consumes 120 kWh of electricity in 8 hours, resulting in a saving of 120 x 14% = 17 kWh. It also improves product quality. Newly molded products retain residual heat; manual removal leaves fingerprints and uneven force, leading to uneven deformation. Automatic demolding can cause damage from falling products, and oil contamination can result in defective products. Robotic arm uses a textureless suction device to remove products, applying even force, with a fixed mold-closing time and normal mold temperature. This reduces product defect rates, saves raw materials, lowers costs, and significantly improves product quality. Unpredictable removal times by workers can cause product shrinkage or overheating and deformation of plastic. If workers fail to remove product successfully, mold closing can damage mold. If robotic arm fails to remove product, it will automatically alarm and stop.
Using a robotic arm to grip plastic parts and runner system sprue is one of main methods of fully automated injection molding. Molds using robotic arms require special attention during mold design. After mold opening and ejection, plastic parts and runner system sprue must be positioned for easy robotic arm gripping. Figure 1-12 shows runner designs suitable for robotic arm operation. Figure (a) shows a three-plate mold with a long runner system sprue that is easy to flip. A small boss is designed on the top side of mold for positioning, facilitating robotic arm gripping. Figure (b) shows a two-plate mold where runner system sprue is on ejector pin after ejection, making it easy for robotic arm to grip.
Figure 1-12 Runner design suitable for robotic operation
Image 1-13 shows a mold structure where reset mechanism hinders operation of robotic arm, creating a safety hazard. This design should be avoided when using robotic arms.
Image 1-13 shows a mold structure where reset mechanism hinders operation of robotic arm, creating a safety hazard. This design should be avoided when using robotic arms.
Figure 1-13 Reset mechanism interferes with manipulator
Image 1-13 shows a fully automated injection molding process. Besides using robotic arms, small plastic parts or parts with less stringent requirements can also be automatically dropped. Different production methods affect design of gating system. Design of gate and runner system must consider fully automated injection molding production, and submarine gates or horn gates should be designed whenever possible. This allows for automatic separation of solidified material within mold during mold opening. Eliminating need for manual finishing after injection molding is a perpetual pursuit in injection molding industry.
In modern processing, three essential factors are: advanced molds, rational processing technology, and efficient processing equipment. Molds play a crucial role in performance and usability of injection molding machines.
High-efficiency automated production requires high-precision molds. Modern processing demands increasingly higher efficiency, automation, and long-life molds. Mold design has evolved from initial experience-based design to computer-aided design, resulting in significant improvements in both product output and quality. Advanced, highly efficient, and automated mold structures, combined with efficient automated machinery, significantly increase enterprise output, improve production efficiency and product quality, and reduce production costs.
Automatic in-mold gate cutting is widely used in Europe. Previously, in-mold cold-cut gates were more common. For example, ring gates are suitable for round products with poor melt flow or products requiring high roundness. They offer advantages such as uniform filling and easy venting, avoiding weld lines and reducing pressure. Gate is ring-shaped, located between runner and cavity, i.e., on outer or inner circumference of molded part. Ring gates are suitable for round products, but removing gate marks is slightly more difficult. Automatic in-mold gate cutting is characterized by high efficiency, precision, and smooth cross-sections. For round products, there are generally two methods for automatic in-mold gate cutting: floating nozzle shearing and floating panel shearing. Both methods utilize mold opening force of injection molding machine to achieve automatic gate cutting.
In-mold cold-cut gates are often limited by shape of product and mold structure. In recent years, in-mold hot-cutting technology has been developed. In-mold heat cutting is an automated injection molding process where gate is cut or extruded before plastic mold is opened, allowing for separation of part material after mold opening. Installing an automatic gate-cutting device within mold is an advanced method. This method automates gate-cutting process within mold, ensuring product meets manufacturing requirements immediately after mold opening, eliminating need for manual gate cutting and significantly improving production efficiency.
"Replacing humans with machines" means prioritizing cost-effectiveness over complex mold structures. Molds without in-mold heat cutting technology struggle to gain a competitive edge, leading to a shift in awareness of many mold manufacturers regarding this technology. In-mold heat-cut molds are widely used in industrialized countries and regions worldwide. This is primarily due to following significant characteristics:
Automated gate separation, reducing reliance on human intervention; Reduced impact of human error on product quality. Automated gate separation during in-mold heat-cutting molding process ensures consistent appearance at gate separation point; Reduced molding cycle time and improved production stability. Automation of in-mold heat-cutting eliminates unnecessary manual actions during production, while fully automated mechanical shearing ensures consistent quality.
In-mold heat-cutting molds offer many significant advantages, but also have some disadvantages:
1. Increased mold costs. In-mold heat-cutting components are relatively expensive, significantly increasing the cost of in-mold heat-cutting molds. If product's added value is low and production volume of plastic parts is not high, it is not economically viable for mold manufacturers.
2. High requirements for in-mold heat-cutting mold manufacturing processes and equipment. In-mold heat-cutting molds require precision machining. Integration and fit between in-mold heat-cutting system and mold are extremely demanding; otherwise, many serious problems may occur during production. For example, rough machining of mold cylinder mounting hole surface may prevent seals from sealing oil, causing cylinder to malfunction; poor fit between cutter and mold core may cause cutter to jam and malfunction, etc.
3. Complex operation and maintenance. In-mold heat-cutting dies are complex to operate and maintain; improper use can easily damage in-mold heat-cutting parts. New users need a considerable amount of time to accumulate experience.
Image 1-13 shows a fully automated injection molding process. Besides using robotic arms, small plastic parts or parts with less stringent requirements can also be automatically dropped. Different production methods affect design of gating system. Design of gate and runner system must consider fully automated injection molding production, and submarine gates or horn gates should be designed whenever possible. This allows for automatic separation of solidified material within mold during mold opening. Eliminating need for manual finishing after injection molding is a perpetual pursuit in injection molding industry.
In modern processing, three essential factors are: advanced molds, rational processing technology, and efficient processing equipment. Molds play a crucial role in performance and usability of injection molding machines.
High-efficiency automated production requires high-precision molds. Modern processing demands increasingly higher efficiency, automation, and long-life molds. Mold design has evolved from initial experience-based design to computer-aided design, resulting in significant improvements in both product output and quality. Advanced, highly efficient, and automated mold structures, combined with efficient automated machinery, significantly increase enterprise output, improve production efficiency and product quality, and reduce production costs.
Automatic in-mold gate cutting is widely used in Europe. Previously, in-mold cold-cut gates were more common. For example, ring gates are suitable for round products with poor melt flow or products requiring high roundness. They offer advantages such as uniform filling and easy venting, avoiding weld lines and reducing pressure. Gate is ring-shaped, located between runner and cavity, i.e., on outer or inner circumference of molded part. Ring gates are suitable for round products, but removing gate marks is slightly more difficult. Automatic in-mold gate cutting is characterized by high efficiency, precision, and smooth cross-sections. For round products, there are generally two methods for automatic in-mold gate cutting: floating nozzle shearing and floating panel shearing. Both methods utilize mold opening force of injection molding machine to achieve automatic gate cutting.
In-mold cold-cut gates are often limited by shape of product and mold structure. In recent years, in-mold hot-cutting technology has been developed. In-mold heat cutting is an automated injection molding process where gate is cut or extruded before plastic mold is opened, allowing for separation of part material after mold opening. Installing an automatic gate-cutting device within mold is an advanced method. This method automates gate-cutting process within mold, ensuring product meets manufacturing requirements immediately after mold opening, eliminating need for manual gate cutting and significantly improving production efficiency.
"Replacing humans with machines" means prioritizing cost-effectiveness over complex mold structures. Molds without in-mold heat cutting technology struggle to gain a competitive edge, leading to a shift in awareness of many mold manufacturers regarding this technology. In-mold heat-cut molds are widely used in industrialized countries and regions worldwide. This is primarily due to following significant characteristics:
Automated gate separation, reducing reliance on human intervention; Reduced impact of human error on product quality. Automated gate separation during in-mold heat-cutting molding process ensures consistent appearance at gate separation point; Reduced molding cycle time and improved production stability. Automation of in-mold heat-cutting eliminates unnecessary manual actions during production, while fully automated mechanical shearing ensures consistent quality.
In-mold heat-cutting molds offer many significant advantages, but also have some disadvantages:
1. Increased mold costs. In-mold heat-cutting components are relatively expensive, significantly increasing the cost of in-mold heat-cutting molds. If product's added value is low and production volume of plastic parts is not high, it is not economically viable for mold manufacturers.
2. High requirements for in-mold heat-cutting mold manufacturing processes and equipment. In-mold heat-cutting molds require precision machining. Integration and fit between in-mold heat-cutting system and mold are extremely demanding; otherwise, many serious problems may occur during production. For example, rough machining of mold cylinder mounting hole surface may prevent seals from sealing oil, causing cylinder to malfunction; poor fit between cutter and mold core may cause cutter to jam and malfunction, etc.
3. Complex operation and maintenance. In-mold heat-cutting dies are complex to operate and maintain; improper use can easily damage in-mold heat-cutting parts. New users need a considerable amount of time to accumulate experience.

