Why does screw of injection molding machine slip?

People use high-speed injection molding machines to shorten injection cycle and improve production e...

News2021-07-24



Key points of design of injection mould for speaker exterior shell

Outer shell of speaker is shown in Figure 1. Maximum size of product is 132.61 mm * 78.21 mm * 42....

News2021-07-21



Design of Injection Mold for Negative Pressure Switch Panel

Negative pressure switch panel product is shown in Figure 1. Maximum size of product is 182.00 mm *...

News2021-07-20



Two-color injection molding technology and its development

Two-color injection molding technology is also called two-component injection molding technology. Th...

News2021-07-19



What is difference between 316 and 316L?

We all know that 316L is a grade of stainless steel, AISI 316L is corresponding American grade, and ...

News2021-07-16

Hot runner injection mould design for printer bottom shell

Printer bottom shell product is shown in Figure 1. Maximum size of product is 381.91 mm * 287.33 mm...

News2021-07-15



Analysis of Factors Affecting Plastic Melt Viscosity

Viscosity is one of the most important basic concepts of plastic processability. It is a quantitativ...

News2021-07-14



How to reduce unpleasant smell and processing energy consumption during injection molding?

Nowadays, no matter in daily life or in fields of production and circulation, injection molded produ...

News2021-07-13



Design of Injection Mould for Protective Cover of Deep Cylindrical Receiver

<Abstract> Forming process of protective cover of deep cylindrical receiver is introduced, and thre...

News2021-07-12



Design of thread withdrawal mechanism for rifle thread of injection mould

【Abstract】Process requirements of threaded plastic parts are analyzed. By comparing design schemes...

News2021-07-10