Mold injection black spot and impurities are always not cleaned up, we tells you truth!

Black spots and impurity defects are the most important factors for rejection rate in normal product...

News2020-07-31



Ten design softwares that every molder should know.

Mechanical design is the first step in mechanical production and the most important factor in dete...

News2020-07-30



Solution of insufficient hardness during die quenching

In production, sometimes there is insufficient hardness after quenching, which is a common defect in...

News2020-07-29



Nine kinds of mold failure solutions!

During injection molding process, gate is stuck in sprue sleeve and is not easy to come out. When mo...

News2020-07-28



Design of Injection Mould for Mobile Phone Shell

Structure of mobile phone shell is relatively complex, including a large number of undercuts, appear...

News2020-07-27

Main Points of Designing Injection Mould of ATM Teller Shell and Fax Machine Face Shell

Product diagram of ATM teller face shell is shown in Figure 1. Maximum external dimensions of produc...

News2020-07-24



Main points of injection mold design of bearing seat of output station

Product picture of bearing housing of output station is shown in Figure 1. Maximum external dimensi...

News2020-07-23



How to identify a reliable mold supplier?

Now in China mould industry, it is very easy to find a few mold processing plants. I think the simpl...

News2020-07-22



Research status and development trend of plastic mold steel at home and abroad

Plastic mold steel occupies a high proportion in the amount of mold steel, which is mainly used to m...

News2020-07-21



Moldflow-based injection process optimization and mold design for plastic toy figures

Considering application environment of predecessor of toy man, since it is a daily necessity, it ...

News2020-07-20