How to understand connection between main runner and sub runner of mold

Main runner, sub runner and gate function are to transport plastic melt from nozzle of injection m...

News2021-03-30



Injection Molding Process and Mold Design for Front Panel of Air Conditioner

Air conditioner is a device that provides cold or hot air, which gives people a comfortable feeling ...

News2021-03-29



Precision injection molding process and mold design of diverter

Flow divider is a structural part on car controller, which is used to divide flow of liquid. Nowaday...

News2021-03-28



Application of Moldflow in hot runner system

Hot runner is a method of heating, so that plastic in entire runner from nozzle of injection machine...

News2021-03-27



Design of injection mould for guide vane of curtain bead automatic machine

When designing an injection mold, demolding method affects mold structure. Main manifestation is tha...

News2021-03-26

How many of these injection molding machines have mold opening failures?

1. Injection molding machine can't open mold again. There is pressure, speed, oil to cylinder, and ...

News2021-03-25



Gas-assisted injection mold design should consider impact on process parameters

Technical characteristics of gas-assisted injection moulding
(1) Design of mold cavity should try to...

News2021-03-24



Warping deformation control of automobile water chamber based on pre-deformation

Plastics are used more and more widely in automobiles, mainly including interior parts, exterior par...

News2021-03-23



Casket quick-change injection mold design

【Abstract】With increasing competition in the market, replacement of plastic products is getting fa...

News2021-03-22



Design of Injection Mold for Coil Frame

Figure 1 shows coil bobbin used for winding, which is molded with high-strength and high-rigidity PC...

News2021-03-20