Printer button two-color mold design (middle mold)

TPE material has good slip resistance and good elastic touch, which can improve touch feel of produc...

News2020-05-16



Four stages of the development of home appliance molds

At the beginning of reform and opening up, household appliances carried people's longing for a bett...

News2020-05-15



Process sharing-TPU injection molding process

Hardness of TPU is usually expressed by internationally recognized Shore hardness. In general, A is ...

News2020-05-14



Dimensional control analysis from molding design to product end

With rapid development of mold industry in recent years, application range of new technologies and ...

News2020-05-13



How to design a mold for plastic injection molding?

First, pre-processing of product
Many mold designers take a product and start to rush into mold. In...

News2020-05-12

Injection mold design thinking process

A mold is a tool that imparts a fixed geometry to finished product to repeat mass production of fini...

News2020-05-11



A set of classic molds, difficult in the details!

This is a medical dropper, which was commissioned by a friend in United States. It has some difficul...

News2020-05-09



Mould Design Sharing——Determination of product demoulding mode

Product demoulding mode refer to which method is used to eject product after injection molding is ...

News2020-05-08



Key points in the design of precision injection molding parts for cars

Most of plastic moulding parts of car are injection-molded. Due to high design precision of these p...

News2020-05-07



Application of 3D printing technology in the design of injection molding

In recent years, with rapid development of 3D printing technology, great progress has been made in m...

News2020-05-06