Design of Injection Molding Device for Local Thin-walled Products

At present, plastics industry has achieved rapid development in China, plastic molding technology is...

News2020-10-04



Importance and maintenance process of injection molding

Today let's talk about mold. Everyone knows that a set of molds is all precious. Injection molding...

News2020-09-30



Do you know five non-destructive inspection methods for mold materials?

Rays commonly used for flaw detection include X-ray and gamma rays emitted by isotope, which are cal...

News2020-09-29



Nine most common failures of injection molds

During injection molding process, gate is stuck in gate sleeve and is not easy to come off. When mol...

News2020-09-28



Key points of scanner shutter injection mold design

Maximum size of scanner shutter product is 121.80 mm * 88.86 mm * 25.77 mm, average thickness of p...

News2020-09-26

88 basic knowledge of mold design that you must know

01 Common plastic engineering materials and it’s shrinkage?
ABS: 0.5% (super broken plastic)
Pc: ...

News2020-09-25



Production process and classification of injection mold

Mold is a model, products are made according to this model, but how is mold produced? Most of mold ...

News2020-09-24



Design of Injection Mould for Automobile Armrest Box

Car armrest box (hereinafter referred to as armrest box) has storage, decoration and support functio...

News2020-09-23



Inventory of die casting mold design knowledge

1, Features of die casting process: Internal structure of die casting is dense, mechanical propertie...

News2020-09-22



Main points of long-distance hollow core injection mold design

Product picture of hollow lamp post is shown in Figure 1. Maximum external dimensions of product are...

News2020-09-21