Plastic parts structure design knowledge

First, in the process of designing plastic parts, we will consider following items:
1. Selection of ...

News2020-06-05



Six common sources of mold-producing machines that are prone to failures

Some mold manufacturing companies machines are often bad. If they are broken, they will be repaired...

News2020-06-04



Mold Structure design of injection molding

Plastic parts layout refers to arrangement of one or more kinds of plastic parts through reasona...

News2020-06-03



Analysis of modern mold manufacturing technology

Rapid development of mold manufacturing technology has become an important part of modern manufactur...

News2020-06-02



Role of hot runners in plastic mold design

Hot runners are already indispensable in injection molding. For plastics processors, choosing a rig...

News2020-06-01

Judging mold steel type from spark!

A method in which steel is brought into contact with a high-speed rotating grinding wheel to approxi...

News2020-05-30



"Classic mold" one-to-four delayed core-drawing mold structure design

Product name: Lower Finish Panel
Compound: PC / ABS
Shrinkage: 1.006
Number of cavities: 1
Mold life...

News2020-05-29



Relationship between injection speed segmentation and quality of injection moulding products

Close relationship between injection speed and product quality makes it a key parameter for injectio...

News2020-05-28



Why do we need inserts in mold design?

Insert is a term for mold. It specifically refers to mold parts used for inlaying in mold core in ...

News2020-05-27



10 kinds of quench crack after heat treatment

In heat treatment of mold steel, quenching is a common process. However, for various reasons, someti...

News2020-05-26