Optimal design of ejection mechanism for injection mold of internal thread cap

Plastic internal screw cap is a common component of daily chemical household products. Internal and ...

News2020-04-07



High-power LED lamp bead lens classification

Design and moulding process of high-power LED lamp bead lens mould
1. First of all, depending on li...

News2020-04-06



Introduction of properties of commonly used plastics, related parameters and functions of injection

In design process of injection molding mold, selection of moulding materials, layout of runner syste...

News2020-04-03



Detailed explanation of 12 kinds of defects in injection molding production

First, cracking
Cracking is a common defect of plastic products. It is mainly caused by cracking at ...

News2020-04-02



Do you know 30 common problems and countermeasures in injection moulding process?

1. Product has a sharp edge (flashing edge) when it start production, cause of lack of material afte...

News2020-04-01

Go straight to scene: cooling water, injection resistance, die casting alloys, die casting machine,

In order to ensure continuous and stable quality of castings during die-casting production process,...

News2020-03-25



6 heat treatment issues to help you understand heat treatment!

Annealing is a heat treatment process in which steel is heated to a temperature above or below cri...

News2020-03-24



Mold product drawing design standards

This standard specifies content and expression specifications that should be expressed in product dr...

News2020-03-23



What should be paid attention to in heat-resistant ABS injection molding?

Heat-resistant ABS plastic is one of five major synthetic plastics. Chinese name of ABS is polymer. ...

News2020-03-21



Mold processing technology: How are mold parts such as mold cores, inserts, inclined tops, and slide

Generally, mold design task book is proposed by part craftsman based on task book of molded part. M...

News2020-03-20