How to choose injection molding machine nozzle?

Basic form of nozzles: nozzles can be divided into straight-through nozzles, locked nozzles, hot-run...

News2021-04-02



Multi-stage injection and segmented injection plastic flow principle of injection molding machine

1. First shot glue is fed at a low speed, move nozzle to cold head, then increase second shot speed ...

News2021-04-01



Floating insert design to prevent core sliding wear

In plastic mold production process, there are many fits between molded parts, mating surfaces betwee...

News2021-03-31



How to understand connection between main runner and sub runner of mold

Main runner, sub runner and gate function are to transport plastic melt from nozzle of injection m...

News2021-03-30



Injection Molding Process and Mold Design for Front Panel of Air Conditioner

Air conditioner is a device that provides cold or hot air, which gives people a comfortable feeling ...

News2021-03-29

Precision injection molding process and mold design of diverter

Flow divider is a structural part on car controller, which is used to divide flow of liquid. Nowaday...

News2021-03-28



Application of Moldflow in hot runner system

Hot runner is a method of heating, so that plastic in entire runner from nozzle of injection machine...

News2021-03-27



Design of injection mould for guide vane of curtain bead automatic machine

When designing an injection mold, demolding method affects mold structure. Main manifestation is tha...

News2021-03-26



How many of these injection molding machines have mold opening failures?

1. Injection molding machine can't open mold again. There is pressure, speed, oil to cylinder, and ...

News2021-03-25



Gas-assisted injection mold design should consider impact on process parameters

Technical characteristics of gas-assisted injection moulding
(1) Design of mold cavity should try to...

News2021-03-24