Introduction to Injection Compression Molding Technology

Compared with traditional injection molding process, main feature of injection compression molding i...

News2021-06-26



PS material basic introduction general purpose polystyrene

PS (polystyrene series plastic) refers to a type of plastic that includes styrene-based in macromole...

News2021-06-25



Two-color bottle cap-cubic mold-unparalleled technical advantages

Cubic mold has an absolute advantage: in the case of same mold installation area, double number of c...

News2021-06-24



What caused rupture of Corinth pillar?

In design of toggle lever type, rigidity of system must be considered. Because toggle lever type ge...

News2021-06-23



Method of improving floating fiber during test of injection molded products

When mold was tested, each mechanism was basically operating normally, but there were serious appear...

News2021-06-22

Design of two-material integrated rotating mould for automobile seals

[Abstract] A large-scale two-material integrated rotating injection mold is designed for PP+TPE auto...

News2021-06-21



Moldflow tips & setting of needle valve gate

Valve gate is an on-off valve, which is often used in hot runner systems to control melt flow front ...

News2021-06-20



Common problems and solutions for forming thread injection molds

Molding thread with a thread-off structure in injection mold is a common injection mold structure, s...

News2021-06-18



Briefly describe characteristics and advantages of various composite injection molding technologies

Multi-component injection molding provides new possibilities for plastic processing, that is, combin...

News2021-06-17



All kinds of imported mold steel performance parameters

VIKING-Cold work tool steel with high wear resistance and high toughness
Model: VIKING
Brand: Sweden...

News2021-06-16