Analysis and solutions of common problems in plastic processing

Quality of raw material itself is poor, and there are too many black spots;
Partial overheating of s...

News2020-10-14



Application of Quality Control Methods for Aluminum Alloy Die Castings

When output of production and service provision process cannot be verified by subsequent supervisors...

News2020-10-09



In plastic mold design, why do some places need to be inserts?

First, what is called insert?
Inserts is a mold term. It is specifically referred to as a mold fitt...

News2020-10-08



Design of Injection Mould with Adjustable Thread Positioning

Cosmetic plastic packaging has requirements for screwing orientation of bottle and cap. By controlli...

News2020-10-07



Design of Two-color Injection Mold for Automobile 3D Interior Parts

With rapid development of automotive industry and fierce competition in automotive industry, consume...

News2020-10-06

Design of Injection Molding Device for Local Thin-walled Products

At present, plastics industry has achieved rapid development in China, plastic molding technology is...

News2020-10-04



Importance and maintenance process of injection molding

Today let's talk about mold. Everyone knows that a set of molds is all precious. Injection molding...

News2020-09-30



Do you know five non-destructive inspection methods for mold materials?

Rays commonly used for flaw detection include X-ray and gamma rays emitted by isotope, which are cal...

News2020-09-29



Nine most common failures of injection molds

During injection molding process, gate is stuck in gate sleeve and is not easy to come off. When mol...

News2020-09-28



Key points of scanner shutter injection mold design

Maximum size of scanner shutter product is 121.80 mm * 88.86 mm * 25.77 mm, average thickness of p...

News2020-09-26