Design of Injection Mould for Slim and Microporous Plastic Parts

【Abstract】Introduced characteristics of polyphenylene sulfide material, combined with a certain ty...

News2021-06-15



From what to how, 11 basic parameters of injection molding process, strength explanation!

01 What is injection speed
Usually injection speed we set refers to speed at which screw advances....

News2021-06-11



How to choose screw for different raw materials?

Features:
①Amorphous plastic, no obvious melting point, glass transition temperature 140～150℃ melt...

News2021-06-10



Do you knowkey technology of hot runner application?

Many processing and product quality problems that occur in production process directly stem from poo...

News2021-06-09



Improvement of Slider Structure in Fixed Mould of Injection Mould

Quality, performance and service life of mold are determined by multiple factors such as quality of ...

News2021-06-08

Design of Injection Mould for Vacuum Cleaner Shell

According to structural characteristics and technical requirements of plastic parts, a pair of 1 th...

News2021-06-07



8 precautions for mold design: temperature control system design

Temperature control system design:
1. In design of automotive injection molds, each mold needs to us...

News2021-06-06



Do you know rheological properties of polymers?

In injection molding, polymer material is heated to a molten state for processing. At this time, mel...

News2021-06-05



Effect of nylon on properties after absorbing water!

Polyamide fiber is commonly known as nylon (Nylon), English name Polyamide (PA), density 1.15g/cm3, ...

News2021-06-03



Physical properties and processing technology of common engineering plastics

1. PS performance: PS is an amorphous polymer with good fluidity and low water absorption (less than...

News2021-06-01