Analysis and treatment of common failures in plastic electroplating

1. Surface of parts cannot be plated with copper layer; cause of this type of failure is generally c...

News2021-08-20



Plastic modification methods and technical parameters

Its function is to have good compatibility between filler and carrier tree, melting point and melt v...

News2021-08-19



Structure improvement of back cover mould of blood glucose meter

【Abstract】After fully evaluating function of back cover of blood glucose meter, we have carefully ...

News2021-08-17



Plastic shrinkage

Shrinkage control of PP plastic is an important aspect of PP modification, good shrinkage control/co...

News2021-08-16



New injection molding machine debugging steps and precautions

Small machine is integral and does not need to be disassembled. When lifting, mold adjustment should...

News2021-08-13

New injection molding machine debugging steps and precautions

Small machine is integral and does not need to be disassembled. When lifting, mold adjustment should...

News2021-08-13



New injection molding machine debugging steps and precautions

Small machine is integral and does not need to be disassembled. When lifting, mold adjustment should...

News2021-08-13



New injection molding machine debugging steps and precautions

Small machine is integral and does not need to be disassembled. When lifting, mold adjustment should...

News2021-08-13



Design of Injection Mould for Hollow Bracket

[Abstract] Through analysis of structural characteristics of hollow bracket, a reasonable mold struc...

News2021-08-11



Form of reasons and improvement measures for injection molding process defects

injection molding process defects...

News2021-08-10