How to choose screw of injection molding machine?

As we all know, "screw plasticization component" of injection molding machine is main core unit of...

News2021-12-16



Design of Injection Mould for Control Panel of Inverter Washing Machine

【Abstract】Taking control panel of a certain inverter washing machine as an example, a pair of 1-ca...

News2021-12-15



How to eliminate 3 kinds of surface defects of injection molded products?

Visible defects on the surface of injection molded products include dark spots, gloss differences or...

News2021-12-14



Characteristics, applications and injection molding processing of PPO, MPPE

Chemical name of polyphenylene ether is poly 2,6-dimethyl 1,4-phenylene ether, PPO (polyphenylene ox...

News2021-12-13



Design and Manufacture of Molding Die for Precision Duplex Plastic Helical Gear of Potentiometer

Figure 1 shows a precision double plastic helical gear in an automobile potentiometer. Large and sma...

News2021-12-12

How to choose the best plastic assembly method

There are many ways to assemble plastic parts, but choosing the best assembly process for plastic pa...

News2021-12-11



Thermoplastic elastomer SIS modification technology and application

Thermoplastic elastomer SIS has attracted great attention since it came out in 1963. It is a tribloc...

News2021-12-10



Design of Injection Mould with Long Hydraulic Core Pulling

【Abstract】According to requirements of long core-pulling structure in mold structure, a long core-...

News2021-12-09



What are methods for warping and deformation of injection molded thin-walled products?

Warpage-deformation: Warpage deformation is one of common defects in injection molding of thin-shell...

News2021-12-08



How much influence does each parameter have on orientation stress?

Picture shows a car lamp made of PC. PC polycarbonate is a material that is more prone to internal s...

News2021-12-07