Design of Injection Mould for Vacuum Cleaner Shell

According to structural characteristics and technical requirements of plastic parts, a pair of 1 th...

News2021-06-07



8 precautions for mold design: temperature control system design

Temperature control system design:
1. In design of automotive injection molds, each mold needs to us...

News2021-06-06



Do you know rheological properties of polymers?

In injection molding, polymer material is heated to a molten state for processing. At this time, mel...

News2021-06-05



Effect of nylon on properties after absorbing water!

Polyamide fiber is commonly known as nylon (Nylon), English name Polyamide (PA), density 1.15g/cm3, ...

News2021-06-03



Physical properties and processing technology of common engineering plastics

1. PS performance: PS is an amorphous polymer with good fluidity and low water absorption (less than...

News2021-06-01

Design of Die Casting Die for Vibration Machine Connector

Pressure casting is a method of filling cavity with liquid or semi-liquid metal at a higher speed un...

News2021-05-31



Nine common problems of color masterbatch

1. Under sunlight, there are stripes of paint in product
This question needs to be considered from t...

News2021-05-29



Design of Injection Mould for L-shaped Internal Fixed Clamping Foot

【Abstract】Analyzed structural characteristics and molding process of L-shaped inner fixed clamp, e...

News2021-05-28



Drawing method of mold assembly drawing must have a firm foundation!

Main purpose of mold assembly drawing is to reflect basic structure of mold and express mutual assem...

News2021-05-27



Knowledge sharing of injection mold hot runner technology

Hot runner gating system can be understood as an extension of injection molding machinery. Function ...

News2021-05-26