Circular shell mold flow analysis and injection mold design

Side core-pulling structure is mostly used in injection mold design to form side holes or recessed p...

News2020-07-06



How to make a injection mould-Five steps of injection mold manufacturing process

How to make a injection mould - First, process analysis of plastic products.
Before mold design, de...

News2020-07-04



Design of compound core pulling mechanism with built-in inclined top block

With rapid development of economy, automobiles as consumer goods have increasingly entered thousands...

News2020-07-03



Theory of injection moulding process

Property of friction between macromolecules when molten plastic flows is called viscosity of plastic...

News2020-07-02



Four aspects to discuss use of mold hot runner

Hot runners are heated to ensure that plastics in runners and gates remain molten. Because there is ...

News2020-07-01

What is benefit of using a secondary roll-out forced demoulding instead of side core pulling?

Button is a commonly used electrical control element, used to turn on or off control circuit to achi...

News2020-06-30



Analysis and Optimization of Deformation Defects in the Opening of Printer Driver Connection

Plastic parts can be generally divided into two categories: appearance plastic parts and internal a...

News2020-06-29



There is no problem with mold polishing, why is brightness of ABS injection molded parts low?

First, injection mold
1. Poor machining of mold cavity
If mold cavity has defects such as scars, mic...

News2020-06-24



16 complete list of deburring process

Burrs are ubiquitous in metal processing. No matter how advanced sophisticated equipment you use, it...

News2020-06-23



Give you a 4-cavity double-head plastic gear injection mold solution

There are two identical gears on both sides of double-headed plastic gear, and gear meshing accuracy...

News2020-06-22