Solution to warpage and deformation defects of thin-walled products

thin-walled product, deformation defects of thin-walled products, warpage and deformation defects of...

News2021-09-27



Precautions for maintenance and adjustment of injection molding machine

Use a precision level to make a rough longitudinal level adjustment on two quenched guide rails (lif...

News2021-09-25



What to do if plastic injection molding is incomplete?

This is a frequently encountered problem, but it is also relatively easy to solve. When it is really...

News2021-09-24



Precautions for TPE and TPR injection molding process

Before newly purchased injection molding machine is used for the first time, or when product needs t...

News2021-09-23



Design of Injection Mould for Automobile High-gloss Grid

Abstract According to structural characteristics of high-gloss grid of a certain car model, CAE anal...

News2021-09-22

Three common defects in polyphenylene sulfide injection molding, how to prescribe right medicine

Polyphenylene sulfide is a thermoplastic engineering plastic with a phenylsulfide group on main cha...

News2021-09-18



Design of Injection Mold for Irradiation Lamp Frame

Product of irradiation lamp holder is shown in Figure 1. Maximum size of product is 98.30 mm * 70.0...

News2021-09-17



Design points of injection mold positioning system

Problem of guiding and positioning is repeated staggered actions when injection mold is closed and o...

News2021-09-16



Design of Injection Mould for 135° Elbow Pipe of Injection Molding Machine

Abstract A 2-cavity two-plate mold was designed for injection molding of plastic parts of 135° elbo...

News2021-09-15



Heat treatment process of plastic mold parts

Different types of steel are used as plastic molds, their chemical composition and mechanical proper...

News2021-09-14