Complicated core-pulling injection mould design for shell of printing and fax machine

Shell of printer and fax machine is shown in Figure 1. Maximum size of product is 478.97 mm * 234.4...

News2021-09-01



Introduction of transparent plastic injection molding process

Due to high light transmittance of transparent plastics, strict requirements on the surface quality ...

News2021-08-31



Analysis of four reasons for insufficient filling of injection products

Inaccurate feeding measurement or abnormal feeding control system operation, abnormal injection cycl...

News2021-08-30



Design of Injection Mould with Side Core-pulling for Decorative Cover

[Abstract] Material, structure and molding process of decorative cover are analyzed, lateral core pu...

News2021-08-26



Improving method of injection molding plastic parts material flower

Silver streaks (material flowers). All kinds of silver threads are produced from volatiles ejected ...

News2021-08-25

Application of black masterbatch in plastic products

In molding and processing of plastic products, almost everyone has used black masterbatch. It is use...

News2021-08-24



Design of Injection Mould for Lid of Food Preservation Bucket

【Abstract】According to structural characteristics of plastic part, mold structure and molding proc...

News2021-08-23



Analysis and treatment of common failures in plastic electroplating

1. Surface of parts cannot be plated with copper layer; cause of this type of failure is generally c...

News2021-08-20



Plastic modification methods and technical parameters

Its function is to have good compatibility between filler and carrier tree, melting point and melt v...

News2021-08-19



Structure improvement of back cover mould of blood glucose meter

【Abstract】After fully evaluating function of back cover of blood glucose meter, we have carefully ...

News2021-08-17