This article explains key points and practical application of stack mold design.

Time:2026-11-17 08:58:37 / Popularity: / Source:

01. Definition of Stack Molds

Stack molds are a cutting-edge technology in the field of plastic injection molds. They are an advanced mold structure that combines multiple single-layer molds in closing direction and is installed on a single injection molding machine for production.
Stack Mold 
Core Principle: By increasing number of mold layers, two or more layers of plastic products can be simultaneously molded during a single injection cycle of injection molding machine. Simply put, it is equivalent to vertically "stacking" multiple traditional single-layer molds, sharing a single gating system. Cavities are distributed across two or more layers in an overlapping arrangement.
Technical Essence: Core of stack mold lies in significantly improving production efficiency and space utilization of a single injection molding machine. When using single-layer molds, traditional injection molding machines typically only utilize 20% to 40% of their rated capacity for injection volume and mold opening stroke, failing to fully utilize their performance. Stack molds, on the other hand, can multiply production output based on number of layers in mold (for example, a two-layer mold can increase production output by approximately 90%-95%) without increasing clamping force (or requiring only a 10%-15% increase).

02. Advantages of Stack Molds

Advantages of stack molds are comprehensive, primarily reflected in production efficiency and economic benefits:
Multiplying Production Efficiency: This is the most significant advantage. Compared to single-layer molds, stack molds can increase output by 90%-95% (for two-layer molds), or even triple or quadruple (for three- or four-layer molds) within same injection cycle, significantly improving production capacity per unit time.
Stack Mold 
Maximizing Equipment Utilization: They fully utilize injection molding machine's shot volume and mold opening stroke. Stack molds utilize underutilized machine performance of traditional molds to produce more parts, allowing a single injection molding machine to achieve same production capacity as two or more machines.
Significant Cost Savings:
Equipment Costs: No need to invest in additional injection molding machines and peripheral equipment.
Factory Costs: Reduced machine space usage saves factory floor space and supporting facilities.
Labor Costs: Typically, only one operator is required to manage a single machine, with labor requirements similar to those for single-layer molds.
Mold Costs: While a single stack mold is more complex and expensive than a single-layer mold, it is generally more economical than the total cost of multiple single-layer molds to achieve same production volume. Furthermore, combining multiple cavities in a single mold shortens mold manufacturing cycle.
6. Efficiency Comparison between Standard and Stack Molds
  Standard Mold (1*8") Double-layer stack mold ( 8+8)
Mold Dimensions 600*600*350 610*650*670
Applicable Injection Molding Machine Models Demag 350T Electric Injection Molding Machine Demqiang (Demag) 350 Electric Injection Molding Machine
Glue Selection Method Hot Runner, Needle Valve Type Hot runner, needle valve type
Molding Cycle 8s 8.2s
Mold Price (RMB) ¥400,000 ¥640,000
Number of Machines Required 2 units 1 unit
Annual Depreciation of Injection Molding Machines, Robots, and Other Equipment (RMB/Year) Approximately 80,000*2 = 160,000 yuan Approximately ¥80,000
Number of Molds Required 2 sets 1 set
Mold Depreciation (RMB/Year) (Mold Lifespan Based on 10 Million Operations) 109,440*2 = ¥218,880 215,650
Plastic Material Cost per Year of Production (RMB) 2,016,368*3 = ¥6,049,104 ¥3,666,124
Labor and Other Costs (RMB) 54,040*2 = ¥108,080 ¥54,040
Electricity Cost per Year of Production (RMB) 494,208*3 = ¥988,416 ¥494,208
Annual Output (Based on 24 Days a Month, 22 Hours a Day) 23,760 475,200
Total Cost (RMB) ¥8,262,168 ¥4,510,022
Investment Required for an Annual Output of 30 Million (RMB) ¥4,527,000 ¥3,855,000
Savings (RMB) ¥672,000  
Raw Material Savings: Optimizing hot runner system can reduce runner agglomerate generation and even achieve waste-free processing, improving material utilization.
Consistent Product Quality: Because all cavities are molded in same injection process, consistent process conditions ensure consistent and uniform quality across multiple-layer products.
Stack Mold 

03. Classification of Stack Molds

Stack molds can be primarily categorized as follows:
3.1 Standard Stack Mold
Description: This is the most basic and common type. Each layer has a similar mold structure, and synchronized opening and closing of each layer is achieved through a synchronized mold opening mechanism.
Layers: These include two-layer, three-layer, and four-layer molds, with a maximum of 10 layers. The greater number of layers, the higher technical difficulty.
3.2 Rotary Stack Mold
Description: Based on conventional stack molds, a rotating mechanism is introduced, allowing certain parts of mold to rotate, enabling more complex molding processes such as multi-color injection molding, multi-material co-injection, or molding of special structures.
Common Forms:
Double-layer, two-sided: 180-degree rotation per cycle.
Double-layer, four-sided: 90-degree rotation per cycle.
Three-layer, two-sided (180-degree rotation per cycle) or four-sided (90-degree rotation per cycle).
Applications: Particularly suitable for parts requiring two-color/multi-color molding or in-mold assembly.
3.3 Tandem Mold
Description: Mentioned in this document but not fully elaborated. Tandem molds generally refer to a special stack mold structure, sometimes also called "tandem molds." This allows for asynchronous injection and cooling of two cavities. For example, one layer can be injected while the other is cooling or ejecting, further optimizing molding cycle. Developed by Institute of Applied Sciences at University of Bielefeld in Germany, it was initially used for molding thick-walled parts.
Stack Mold 

04. Key Structures of Stack Molds

Structure of a stack mold is significantly more complex than that of a traditional mold. Its key core structures include:
4.1 Synchronous Mold Opening Mechanism
Function: This is "heart" of the stack mold. It must ensure precise synchronization of all mold layers during mold opening and closing, maintaining an equal mold opening distance. Any asynchrony can result in product damage or mold failure.
Implementation Method:
Rack and Pinion Mechanism: The most common method. A large gearbox is installed in the center or at one of four corners of mold. Driven by racks connected to each mold platen, it ensures synchronized movement of all mold plates.
Hydraulic Synchronizing Cylinder: A hydraulic cylinder is used to enforce synchronization of movement of each layer.
Components: Typically includes a gearbox, rack, and rack mounting bracket.
4.2 Hot Runner System
Function: Evenly delivers molten plastic from injection molding machine nozzle to each cavity on each layer. This is key to achieving efficient, high-quality production.
Design Key Points:
Main nozzle: Requires a special motion guide mechanism to ensure it does not dislodge from guide sleeve during mold opening and closing.
Connection between runner plate and hot nozzle: Ensures sealing and compensates for thermal expansion.
Balancing Technology: Runner design must ensure consistent time, pressure, and temperature for melt reaching each cavity on each layer.
Hot runner system protection: This includes integrated design of wire rack and junction box, as well as anti-collision protection for hot nozzle.
4.3 Intermediate Support and Guide Slide Mechanism
Function: After stack mold is opened, intermediate platens are cantilevered. This mechanism supports and guides these platens, preventing them from sagging or shifting due to their own weight and ensuring mold closing accuracy.
Components: Includes guide slides, adjustment screws, and other components. It is typically supported and guided by injection molding machine's coring column.
Stack Mold 
4.4 Ejector System
Function: Reliably ejects each layer of product from mold cavity after mold opening.
Features: Due to large number of layers, ejector system may be more complex. Hydraulic ejectors (cylinders) or mechanical ejectors are commonly used, and a sensor switch is required to confirm completion of ejection action.
Synchronization: Ejector system must also coordinate with mold opening action to ensure that product is ejected after mold is fully opened.
4.5 Guide and Positioning System
Function: Ensures precise alignment of each mold layer during mold closing, ensuring product dimensional accuracy and mold life.
Features: In addition to conventional guide pins and bushings, stack molds typically require more sophisticated and robust guide systems. This can include increasing number and size of straight locating blocks (tube blocks) and securing them with screws from front to ensure stable and reliable guidance.
Stack Mold 

05. Detailed Design Standards and Key Points

When designing a stack mold, following standards must be strictly considered:
5.1 Injection Molding Machine Capacity Verification
Mold opening stroke: This is primary verification parameter. Required mold opening stroke must meet following criteria: Total mold opening stroke > Required mold opening stroke for a single-layer mold × Number of layers + Interlayer spacing safety margin (5-10mm). If injection molding machine's maximum mold opening stroke is insufficient, mold will not be able to properly remove part.
Plasticizing capacity: Injection molding machine's maximum shot size must be greater than combined weight of all layers and runners. With production doubled, machine's plasticizing rate requirements also increase.
Injection rate: Injection rate may need to be increased appropriately to ensure that melt can still fill all cavities after flowing through the longer hot runner.
5.2 Hot Runner System Design Standards
Main nozzle length and mold opening stroke: They must be properly configured to ensure that main nozzle does not dislodge from guide sleeve after mold is opened.
Pressure relief: Melt pressure relief mechanism within hot runner must be considered to prevent flow during mold opening.
Relationship between cavity layout and main nozzle: Cavity layout should be symmetrical around main nozzle to ensure flow balance.
5.3 Stiffness and Strength Calculation
Middle layer formwork withstands bending moments during mold opening and must possess sufficient stiffness and strength to prevent excessive deformation. This typically requires increasing mold base thickness or using high-strength materials.
5.4 Exhaust System Design
Multi-layer construction results in longer and more complex exhaust paths. Exhaust must be carefully considered on each layer's parting surface, such as by providing exhaust grooves or using exhaust plugs, to prevent defects such as burning and underfill caused by trapped air.
5.5 Cooling System Design
Independent, balanced cooling circuits must be designed for each layer to ensure uniform cooling of finished product, shortening cycle times and minimizing deformation.
5.6 Safety and Interference Checking
In 3D design, all moving parts (such as slides and lifters) must be thoroughly checked for interference between layers and throughout mold opening and closing process.
In summary: Stack molds are a technology that, through sophisticated mechanical design, elevates production efficiency to new heights. While maintenance and initial investment may be high, its significant advantages in increasing production capacity and reducing unit costs in mass production make it irreplaceable in applications such as flat parts, shallow-cavity housings, and small, multi-cavity, thin-walled parts. Successful design relies on precise control of synchronization mechanism, hot runners, and overall rigidity.

Go To Top