News

Four precautions for burnt injection products
When melt is injected into a cavity with a large volume under high-speed and high-pressure condition...
News2020-11-29

This is injection mold, don't say I haven't seen it yet!
Mold injection molding is a processing method used in mass production of some complicated parts. Spe...
News2020-11-25

Design of Die Casting Mould for Folding Hinge Ring
Essence of pressure casting (referred to as die casting) is to fill cavity of die casting mode with ...
News2020-11-24

Development and application of hot runner system for air-conditioning fan blade mould containing gla
In refrigeration link of air conditioner, two parts play a key role, one is axial fan on outdoor uni...
News2020-11-23

Why should mold be heat treated?
In order to make metal workpiece have required mechanical properties, physical properties and chemic...
News2020-11-22

In post-epidemic era, DMC 2020 uses advantages of industrial chain to achieve new responsibilities w
DMC 2020 China International Mold Technology and Equipment Exhibition and 2020 Shanghai Internationa...
News2020-11-19

Can you design drawer molds? This is really difficult
1. This product is a transparent plastic part, with high quality requirements for wire clamping and ...
News2020-11-17

Design of Injection Mold for One-piece Shell of Rearview Mirror
Car rearview mirrors are divided into exterior rearview mirrors and inner rearview mirrors. Exterior...
News2020-11-16

PCB guide plate injection mold design points + 3D drawing files
PCB guide plate product is shown in Figure 1. Maximum size of product is 254.84 mm * 217.70 mm * 5...
News2020-11-12

Try these methods to solve small fault of injection molding machine
Maintenance work must understand operation method of equipment, have some basic knowledge of injec...
News2020-11-11