Moldflow Analysis and Injection Molding: Reference Standards for Injection and Holding Time Settings

Polycarbonate (PC) is an excellent engineering plastic. It boasts high transparency and excellent im...

News2025-12-27



What are factors that affect plastic shrinkage?

2 Impact of molding process on shrinkage rate of plastic products
(1) As molding temperature remains...

News2025-12-26



How to Distinguish Between Structural, Functional, and Aesthetic Plastic Parts

When manufacturing injection-molded parts, you often hear terms like "structural part," "function...

News2025-12-26



In-Depth Optimization Guide for Injection Molding Machine Injection Speed and Process Parameters (Mo

FANUC Electric Injection Molding Machine In-Depth Optimization Guide for Injection Speed ​​and Pro...

News2025-12-25



Causes and Solutions for Short Shots in Injection Molding

A short shot, also known as insufficient filling or short shot, refers to inability of polymer to co...

News2025-12-25

A Guide to Injection Mold Demoulding System Design!

During injection molding process, after plastic part cools and solidifies in mold cavity, removing i...

News2025-12-24



Solutions and Practical Guide to Sticking Problems on Injection Molding Machines Under 800T

Sticking (poor mold release) occurs when adhesion between molten plastic and mold surface during cav...

News2025-12-23



Mechanical Structure and Design – Sharing 21 Surface Treatments

How many surface treatment processes are you familiar with or have you encountered? Don't worry if ...

News2025-12-23



Router Antenna Protective Sleeve Handle Overmolding Mold Design

Structure of a router antenna protective sleeve handle is shown in Figure 1, with a total production...

News2025-12-22



Solutions and Practical Guide to Oil Stain Problems on Injection Molding Machines Under 800T

I. Nature and Core Causes of Oil Stain
1.1 Definition and Microscopic Mechanism of Oil Stain
Oil sta...

News2025-12-17