Injection molding process and characteristics of each stage

Injection molding process mainly includes six stages: mold closing-filling-pressure holding-cooling-...

News2024-11-26



Aluminum alloy die-casting technology: quality defects and improvement measures of aluminum alloy di

As a special forming technology, die casting has been widely used in many industries and fields, esp...

News2024-11-25



Summary of abnormal analysis of automobile molds

Make a cross section through center of hot nozzle and check from top view or bottom view to ensure t...

News2024-11-25



Research status and development trends of high-strength and tough die-cast magnesium alloys

Density of magnesium alloy is about 67% of aluminum and 23% of steel. It also has high specific stre...

News2024-11-23



N93 mobile phone battery cover injection mold design key points

N93 mobile phone battery cover product is shown in Figure 1. Maximum outer dimensions of product are...

News2024-11-23

Mold design affects quality of aluminum die castings

With development of science and technology, requirements for safety and aesthetic appearance of die-...

News2024-11-22



Seven plastic surface treatment processes you must know

Plastic surface treatment is to form a layer with some or more special properties on the surface of ...

News2024-11-22



Quick design of technical parameters for local pressurization of die casting

Die castings with complex structures and uneven wall thickness are prone to heat nodes, especially i...

News2024-11-21



Hot runner mold technology, this time it is explained clearly!

Hot runner is a method of heating to ensure that plastics in runner and gate remain molten. Hot runn...

News2024-11-21



A core-pulling quick-change guide mechanism for die-casting molds

With requirements for lightweight vehicles, engines are becoming more integrated and structures of d...

News2024-11-20