How to solve stress marks (ejector pin marks, white edges, thick and thin marks)?

On plastic products, especially those whose raw materials are ABS, PP, and PC, we often see shiny st...

News2023-12-17



Design of Injection Mold for Stabilizing Bracket of Mobile Intelligent Terminal

Bracket structure is shown in Figure 1, shape is "Y" shape, main body is a cylindrical rod, center...

News2023-12-14



Logistics crane controller cover injection mold design

Logistics crane controller cover structure is in a semi-enveloping shape, as shown in Figure 1. Plas...

News2023-12-12



11 major principles of plastic mold parts design! Must be kept in mind

General principles of product structure design are basic ideas and rules to be followed in product s...

News2023-12-11



Bow tie flip cover injection mold design

Structure of plastic part is shown in Figure 1. It is used in daily chemical plastic packaging. Uppe...

News2023-12-09

Analysis of examples of imitation failure in die-casting runner design

Abstract: Through analysis of an example of a failed die-casting mold design, key elements that shou...

News2023-12-08



Elastic sleeve molding process analysis and mold design

Structure of elastic sleeve is shown in Figure 1. Material is PC+ABS and shrinkage rate is 0.53% to ...

News2023-12-07



Design of injection mold for nylon elbow joint

Nylon elbow joint has a 2-section elbow structure, material is modified nylon PA6, and shrinkage rat...

News2023-12-06



Injection molding defect form, this is too comprehensive! Please forward to each other

During injection molding process, it is a common phenomenon for products to shrink and dent. Main re...

News2023-12-04



Key Points of Injection Mold Design for Light Guide Column of Medical Therapeutic Instrument

See Figure 1 for light guide column products of medical therapeutic instruments. Maximum dimensions ...

News2023-12-02