Die-casting design specifications - design (Part 1)

This series mainly introduces specifications related to die-casting design, including an introductio...

News2024-06-19



Solutions to plastic product mold opening problems (2)

This article mainly introduces problems that arise during mold opening, mold trial and mass producti...

News2024-06-18



Introduction to injection molding process of taillight masks

Let's make a brief introduction to taillight masks. Taillight masks are available in single-color, ...

News2024-06-14



Die-casting design specifications—Introduction to die-casting mold technology

This series mainly introduces specifications related to die-casting design, including an introductio...

News2024-06-12



Solutions to plastic product mold opening problems (1)

This article mainly introduces problems that arise during mold opening, mold trial and mass producti...

News2024-06-12

Material Technology | Comparison of Magnesium Alloy Die Casting and Aluminum Alloy Die Casting

Die casting is a process of metal smelting and processing. It is a casting method in which molten al...

News2024-06-11



Principles and countermeasures of fogging of car headlights

In addition to spraying UV paint on the surface of car headlight mask (transparent PC material), mos...

News2024-06-11



Case analysis of die-casting mold temperature and shrinkage holes in die-casting parts

Abstract: Aluminum alloy hydraulic valve body products used in automobile automatic transmissions ha...

News2024-06-08



Key Points of  for Driving Recorder Accessories

Accessory products of driving recorder are shown in Figure 1. Maximum dimensions of product are 97.8...

News2024-06-08



Die-casting design specifications - introduction to commonly used materials

This series mainly introduces specifications related to die-casting design, including an introductio...

News2024-06-07