News
Injection mold 3D design sequence and design key points summary
Design points: can extend but not stretch, can stretch but not connect, can be flat but not beveled,...
News2024-12-27
Effect of heat treatment on structure and mechanical properties of die-cast AlSi10MnMg shock tower
As a key load-bearing component connecting car body and chassis, shock tower is mainly used to absor...
News2024-12-26
Two-color mold design information
2. Improve feel. Some handheld products require use of Rubber on handheld part, which will make feel...
News2024-12-26
Analysis of exhaust duct deceleration structure of aluminum alloy die-casting parts
Aluminum alloy die-casting has advantages of high dimensional accuracy, good appearance quality, and...
News2024-12-24
Research on injection mold for thin-walled inner wheel cover of automobile
Large thin-walled inner wheel cover has an outer dimension of 1407mm*390 mm*656 mm and a wall thickn...
News2024-12-24
Impact of high pressure casting and rheocasting on salt core
Today, high pressure casting processes account for 60% of aluminum castings and more than half of al...
News2024-12-23
17 key points to pay attention to when designing injection molds
Mold industry is a basic industry in manufacturing industry, basis for transformation of technologic...
News2024-12-23
Research on aluminum alloy semi-solid die-casting technology for automobile left suspension arm
Semi-solid die-casting technology of aluminum alloy left suspension arm was studied, casting structu...
News2024-12-20
Design of an injection mold with a complex core head structure
This paper aims at design difficulties of molds with complex core head structures, innovatively prop...
News2024-12-20
A new practical design for die-casting super-point cooling
Under trend of energy conservation and emission reduction, more and more attention is being paid to ...
News2024-12-19